# Installation Instructions

Please follow the instructions below to build and install Taskwarrior from source.

# Dependencies

You will need the CMake 3.0+ build system installed in order to build Taskwarrior from source.
More information on CMake can be obtained at https://cmake.org

You will also need:
  - make

You will need a C++ compiler that supports full C++17, which includes:
  - gcc 7.1   (released 2017-05-02)
  - clang 5.0 (released 2017-09-07)

You will need the following libraries:
  - libuuid (not needed for OSX)

You will need a Rust toolchain of the Minimum Supported Rust Version (MSRV):
  - rust 1.88.0

# Basic Installation

Briefly, these shell commands will unpack, build and install Taskwarrior:
```
$ tar xzf task-X.Y.Z.tar.gz                        [1]
$ cd task-X.Y.Z                                    [2]
$ cmake -S . -B build -DCMAKE_BUILD_TYPE=Release   [3]
$ cmake --build build                              [4]
$ sudo cmake --install build                       [5]
$ cd .. ; rm -r task-X.Y.Z                         [6] (see: Uninstallation)
```
These commands are explained below:

  1. Unpacks the source tarball.
     This creates the directory task-X.Y.Z, containing all the code.

  2. Change directory to the root of the distribution.

  3. Invokes CMake to scan for dependencies and machine-specific details, then generate the makefiles.
     Requests an optimized build, which will run faster and be more compact.
     This may take a minute.

  4. Builds Taskwarrior.
     This may take a minute.

  5. Installs the program, documentation and other data files.

  6. Removes the temporary directory.

# Build and configurations options

You can customize the configuration run with CMake variables.
This will modify the installation process:

To change the installation directory you use the following configuration variable:

```shell
cmake -DCMAKE_INSTALL_PREFIX=<path-to-installation-dir> .
```

cmake configuration variables are applied with the -D option and consist of a <name> and a <value>:

```shell
cmake -D<name>=<value> .
```

Five more variables can customize the installation process.
The following table lists them and their defaults, plus the `CMAKE_INSTALL_PREFIX`:

```
CMAKE_INSTALL_PREFIX  /usr/local
TASK_BINDIR           bin
TASK_DOCDIR           share/doc/task
TASK_RCDIR            share/doc/task/rc
TASK_MAN1DIR          share/man/man1
TASK_MAN5DIR          share/man/man5
```

The corresponding `TASK_*` variables will be combined with `CMAKE_INSTALL_PREFIX` to get absolute installation directories:

```
CMAKE_INSTALL_PREFIX/TASK_BINDIR   /usr/local/bin
CMAKE_INSTALL_PREFIX/TASK_DOCDIR   /usr/local/share/doc/task
CMAKE_INSTALL_PREFIX/TASK_RCDIR    /usr/local/share/doc/task/rc
CMAKE_INSTALL_PREFIX/TASK_MAN1DIR  /usr/local/share/man/man1
CMAKE_INSTALL_PREFIX/TASK_MAN5DIR  /usr/local/share/man/man5
```

The following variables control aspects of the build process:

```
SYSTEM_CORROSION - Use system provided corrosion instead of vendored version
ENABLE_TLS_NATIVE_ROOTS - Use the system's TLS root certificates
```

# Uninstallation

There is no uninstall option in CMake makefiles.
This is a manual process.

To uninstall Taskwarrior, remove the files listed in the `install_manifest.txt` file that was generated when you built Taskwarrior.

```shell
cd task-X.Y.Z
sudo xargs rm < build/install_manifest.txt
```

If you want to uninstall this way, you will need to omit step [6] above and retain the source folder after installation.

# Taskwarrior Build Notes

Taskwarrior has dependencies that are detected by CMake in almost all cases, but there are situations and operating systems that mean you will need to offer a little help.

If Taskwarrior does not build on your system, first take a look at the Operating System notes below.
If this doesn't help, then go to the Troubleshooting section, which includes instructions on how to contact us for help.

# Offline Build Notes

It is common for packaging systems (e.g. NixOS, FreeBSD Ports Collection, pkgsrc, etc) to disable networking during builds.
This restriction requires all distribution files to be prepositioned after checksum verification as a prerequisite for the build.
The following steps have been successful in allowing Taskwarrior to be built in this environment:

1. Extract all crates in a known location, e.g. `${WRKDIR}/cargo-crates`
   This includes crates needed for corrosion (search for Cargo.lock files)

2. Create `.cargo-checksum.json` for each crate
   For example:
   ```shell
   printf '{"package":"%s","files":{}}' $(sha256 -q ${DISTDIR}/rayon-core-1.12.1.tar.gz) \
          > ${WRKDIR}/cargo-crates/rayon-core-1.12.1/.cargo-checksum.json
   ```
3. Create a custom config.toml file
   For example, ${WRKDIR}/.cargo/config.toml
   ```ini
   [source.cargo]
   directory = '${WRKDIR}/cargo-crates'
   [source.crates-io]
   replace-with = 'cargo'
   ```
4. After running CMake, configure cargo
   For example:
   ```shell
   cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${CARGO_ENV} \
     /usr/local/bin/cargo update \
     --manifest-path ${WRKDIR}/.cargo/config.toml \
     --verbose
   ```
5. Set CARGO_HOME in environment
   For example
   ```
   CARGO_HOME=${WRKDIR}/.cargo
   ```

The build and installation steps should be the same as a standard build at this point.

# Operating System Notes

## Cygwin
If `make install` fails when writing to the `/usr/local/share/` directory, this may be because your current login doesn't have permission to write to the Windows directory containing your Cygwin installation.
Either login to Windows as an Administrator and try the `make install` process again, or reinstall Cygwin under your normal Windows login.

## Darwin, 32bit
Taskwarrior needs to be built from source, and use this configure command:

```shell
cmake -DCMAKE_C_FLAGS=-m32 -DCMAKE_CXX_FLAGS=-m32 -DCMAKE_EXE_LINKER_FLAGS=-m32 .
```

See:
 - https://taskwarrior.org/issues/817
 - https://stackoverflow.com/questions/3261909/build-32bit-on-64-bit-linux-using-a-configure-script
 - https://stackoverflow.com/questions/2617508/cmake-gcc-cuda-and-m32-wtf
 - https://stackoverflow.com/questions/6077414/cmake-how-to-set-the-ldflags-in-cmakelists-txt

## OpenBSD
In order to build Taskwarrior 2.4.2+, you might need to install a newer GCC version from ports or packages.

Afterward, run

```shell
cmake -DCMAKE_CXX_COMPILER=eg++ .
```

and build normally.

See: https://github.com/GothenburgBitFactory/taskwarrior/issues/1605

## WASM
Using the Emscripten compiler, you can achieve it like this:

```shell
cmake -DCMAKE_CXX_COMPILER=emcc -DCMAKE_BUILD_TYPE=release -DENABLE_WASM=ON \
      -DCMAKE_EXE_LINKER_FLAGS="-m32 -s NO_DYNAMIC_EXECUTION=1 -s WASM=1 -s NO_EXIT_RUNTIME=1 -s INVOKE_RUN=0" \
      -DCMAKE_CXX_FLAGS_RELEASE="-O2 -m32"
```

This will produce an optimized WASM with a main() that is callable multiple times.

# Troubleshooting

If you've recently made changes to dependencies (by reinstalling them, for example) be sure to rerun `cmake .` before trying to execute `make` again.

CMake will run and locate all the necessary pieces for the build, and create a Makefile.
There may be errors and warnings when running CMake, or there may be compiler errors and warnings when running `make`.
Sometimes you will run CMake with no reported problems, and the build will fail later.
This is almost always because CMake is mistaken about some assumption.

If a build does not succeed, please send the contents of the `CMakeCache.txt` and `CMakeFiles/CMakeOutput.log` files to support@gothenburgbitfactory.org.

If CMake runs but Taskwarrior does not build, please send the contents of the above files as well as a transcript from the build, which is not written to a file and must be captured from the terminal.
