calc(1)                                                  General Commands Manual                                                 calc(1)

NAME
       calc - arbitrary precision calculator

SYNOPSIS
       calc [-c] [-C] [-d]
            [-D calc_debug[:resource_debug[:user_debug]]]
            [-e] [-f filename] [-h] [-i] [-m mode] [-O]
            [-p] [-q] [-s] [-u] [-v] [[--] calc_cmd ...]

       #!/usr/bin/calc [optional_other_flags ...] -f

DESCRIPTION
       -c     Continue  reading command lines even after a scan/parse error has caused the abandonment of a line.  Note that this option
              only deals with scanning and parsing of the calc language.  It does not deal with execution or run-time errors.

              For example:

                   calc read many_errors.cal

              will cause calc to abort on the first syntax error, whereas:

                   calc -c read many_errors.cal

              will cause calc to try to process each line being read despite the scan/parse errors that it encounters.

              By default, calc startup resource files are silently ignored if not found.  This flag will report missing startup resource
              files unless -d is also given.

       -C     Permit the execution of custom builtin functions.  Without this flag, calling the custom() builtin  function  will  simply
              generate an error.

              Use  of  this  flag  may  cause calc to execute functions that are non-standard and that are not portable.  Custom builtin
              functions are disabled by default for this reason.

       -d     Disable the printing of the opening title.  The printing of resource file debug and informational messages  is  also  dis-
              abled as if config("resource_debug", 0) had been executed.

              For example:

                   calc "read qtime; qtime(2)"

              will output something like:

                   qtime(utc_hr_offset) defined
                   It's nearly ten past six.

              whereas:

                   calc -d "read qtime; qtime(2)"

              will just print:

                   It's nearly ten past six.

              This flag disables the reporting of missing calc startup resource files.

              This flag also disables the printing the leading tilde. For example:

                   calc 2/3

              will print:

                   ~0.66666666666666666667

              whereas:

                   calc -d 2/3

              will just print:

                   0.66666666666666666667

       -D calc_debug[:resource_debug[:user_debug]]
              Force the initial value of config("calc_debug"), config("resource_debug") and config("user_debug").

              The  :  separated  strings are interpreted as signed 32 bit integers.  After an optional leading sign a leading zero indi-
              cates octal conversion, and a leading ``0x'' or ``0X'' hexadecimal conversion.  Otherwise, decimal conversion is assumed.

              By default, calc_debug is 0, resource_debug is 3 and user_debug is 0.

              For more information use the following calc command:

                   help config

       -e     Ignore any environment variables on startup.  The getenv() builtin will still return values, however.

       -f filename
              This flag is normally only with calc shell scripts.

              This flag is required when using calc in shell script mode.  It must be at the end of the initial #!  line of the  script,
              as in:

                   #!/usr/bin/calc [optional_other_flags ...] -f

              the rest of the file will be processed in shell script mode.

              A common flag to use, prior to the -f on the #! line is the -q flag.  For example:

                   #!/usr/bin/calc -q -f

              See SHELL SCRIPT MODE section of this man page below for details.

              While the actual form of this flag is:

                   -f filename

              for  systems that treat an executable that begins with #!  as a script, the path of the executable is appended by the ker-
              nel as the final argument to the exec() system call.  This is why the -f flag at the very end of the #!  line.

              It is possible use -f filename on the command line:

                   calc [optional_other_flags ...] -f filename

              This will cause calc to process lines in filename in shell script mode.

              NOTE: The use of -f does NOT imply -q and thus one would need to use

                   calc [optional_other_flags ...] -q -f filename

              to disable the use of calc startup files as well.

              The use of -f filename implies the -s flag.

       -h     Print a help message.  This option implies -q.  This is equivalent to the calc command help help.  The  help  facility  is
              disabled unless the mode is 5 or 7.  See -m.

       -i     Become  interactive  if possible.  This flag will cause calc to drop into interactive mode after the calc_cmd arguments on
              the command line are evaluated.  Without this flag, calc will exit after they are evaluated.

              For example:

                   calc 2+5

              will print the value 7 and exit whereas:

                   calc -i 2+5

              will print the value 7 and prompt the user for more calc commands.

       -m mode
              This flag sets the permission mode of calc.  It controls the ability for calc to open files and  execute  programs.   Mode
              may be a number from 0 to 7.

              The mode value is interpreted in a way similar to that of the chmod(1) octal mode:

                   0  do not open any file, do not execute progs
                   1  do not open any file
                   2  do not open files for reading, do not execute progs
                   3  do not open files for reading
                   4  do not open files for writing, do not execute progs
                   5  do not open files for writing
                   6  do not execute any program
                   7  allow everything (default mode)

              If  one  wished to run calc from a privileged user, one might want to use -m 0 in an effort to make calc somewhat more se-
              cure.

              Mode bits for reading and writing apply only on an open.  Files already open are not effected.  Thus if one wanted to  use
              the  -m  0  in  an effort to make calc somewhat more secure, but still wanted to read and write a specific file, one might
              want to do in sh(1), ksh(1), bash(1)-like shells:

                   calc -m 0 3<a.file

              Files presented to calc in this way are opened in an unknown mode.  Calc will attempt to read or write them if directed.

              If the mode disables opening of files for reading, then the startup resource files are disabled as if -q was  given.   The
              reading of key bindings is also disabled when the mode disables opening of files for reading.

       -O     Use  the  old  classic  defaults  instead  of  the  default configuration.  This flag as the same effect as executing con-
              fig("all", "oldcfg") at startup time.

              NOTE: Older versions of calc used -n to setup a modified form of the default calc configuration.  The  -n  flag  currently
              does nothing.  Use of the -n flag is now deprecated and may be used for something else in the future.

       -p     Pipe processing is enabled by use of -p.  For example:

                   calc -p "2^21701-1" | fizzbin

              In  pipe mode, calc does not prompt, does not print leading tabs and does not print the initial header.  The -p flag over-
              rides -i.

              When running calc as a shell script (see SHELL SCRIPT MODE for details), calc will close  standard  input  (stdin)  during
              startup  UNLESS  the  -p flag is given on the command line.  When calc is running in shell script mode, shell scripts that
              call the prompt(str) builtin will not work properly (the prompt builtin will always fail) unless the -p flag is  given  on
              the command line.

       -q     Disable the reading of the startup scripts.

              This  allows  the  script  to run independently of startup scripts such those managed by the $CALCRC environment variable.
              For example, this will disable the use of the common calcrc file (usually ~/.calcrc).

       -s     By default, all calc_cmd args are evaluated and executed.  This flag will disable their evaluation and instead  make  them
              available as strings for the argv() builtin function.

       -u     Disable buffering of stdin and stdout.

       -v     Print the calc version number and exit.

       --     The double dash indicates to calc that no more options follow.  Thus calc will ignore a later argument on the command line
              even if it starts with a dash.  This is useful when entering negative values on the command line as in:

                   calc -p -- -1 - -7

CALC COMMAND LINE
       With  no  calc_cmd  arguments, calc operates interactively.  If one or more arguments are given on the command line and -s is NOT
       given, then calc will read and execute them and either attempt to go interactive according as the -i flag was present or absent.

       If -s is given, calc will not evaluate any calc_cmd arguments but instead make them available as strings to  the  argv()  builtin
       function.

       Sufficiently  simple  commands with no characters like parentheses, brackets, semicolons, '*', which have special interpretations
       in UNIX shells may be entered, possibly with spaces, until the terminating newline.  For example:

            calc 23 + 47

       will print 70.  However, command lines will have problems:

            calc 23 * 47

            calc -23 + 47

       The first example above fails because the shell interprets the '*' as a file glob.  The second example  fails  because  '-23'  is
       viewed as a calc option (which it is not) and do calc objects to that it thinks of as an unknown option.  These cases can usually
       be made to work as expected by enclosing the command between quotes:

            calc '23 * 47'

            calc "print sqrt(2), exp(1)"

       or in parentheses and quotes to avoid leading -'s as in:

            calc '(-23 + 47)'

       One may also use a double dash to denote that calc options have ended as in:

            calc -- -23 + 47

            calc -q -- -23 + 47

       If  '!'  is to be used to indicate the factorial function, for shells like csh(1) for which '!' followed by a non-space character
       is used for history substitution, it may be necessary to include a space or use a backslash to escape the special meaning of '!'.
       For example, the command:

            print 27!^2

       may have to be replaced by:

            print 27! ^2    or      print 27\!^2

       Reading from standard input when calc is part of a pipe works as long as the -p flag is given to calc.  For  example,  this  will
       print chongo was here:

            echo chongo was here | calc -p 'print fgetline(files(0));'

       while this does not:

            echo chongo was here | calc 'print fgetline(files(0));'

       nor will this print chongo was here:

            echo chongo was here | calc -i 'print fgetline(files(0));'

       This is because without -p, the interactive parser, in an effort to parse interactive commands, flushes data on standard input.

CALC STARTUP FILES
       Normally  on  startup, if the environment variable $CALCRC is undefined and calc is invoked without the -q flag, or if $CALCRC is
       defined and calc is invoked with -e, calc looks for a file "startup" in the calc resource directory .calcrc in  the  user's  home
       directory,  and  .calcinit  in  the  current  directory.   If one or more of these are found, they are read in succession as calc
       scripts and their commands executed.  When defined, $CALCRC is to contain a ':' separated list of names of files, and if calc  is
       then  invoked without either the -q or -e flags, these files are read in succession and their commands executed.  No error condi-
       tion is produced if a listed file is not found.

       If the mode specified by -m disables opening of files for reading, then the reading of startup files is also disabled  as  if  -q
       was given.

CALC FILE SEARCH PATH
       If  the  environment  variable $CALCPATH is undefined, or if it is defined and calc is invoked with the -e flag, when a file name
       not beginning with /, ~ or ./, is specified as in:

            calc read myfile

       calc searches in succession:

            ./myfile
            ./myfile.cal
            /usr/lib/myfile
            /usr/lib/myfile.cal
            /usr/share/calc/custom/myfile
            /usr/share/calc/custom/myfile.cal

       If the file is found, the search stops and the commands in the file are executed.  It is an error if no readable  file  with  the
       specified  name  is found.  An alternative search path can be specified by defining $CALCPATH in the same way as PATH is defined,
       as a ':' separated list of directories, and then invoking calc without the -e flag.

       Calc treats all open files, other than stdin, stdout and stderr as files available for reading and writing.  One may present calc
       with an already open file using sh(1), ksh(1), bash(1)-like shells is to:

            calc 3<open_file 4<open_file2

       For more information use the following calc commands:

            help help
            help overview
            help usage
            help environment
            help config

SHELL SCRIPT MODE
       If the first line of an executable file begins #!  followed by the absolute pathname of the calc program and the first line  ends
       with the flag -f as in:

            #!/usr/bin/calc [optional_other_flags ...] -f

       the rest of the file will be processed in shell script mode.  Note that -s -f must be at the end of the initial ``#!'' line.  Any
       other optional optional_other_flags must come before the -f flag.

       In  shell script mode the contents of the file are read and executed as if they were in a file being processed by a read command,
       except that a "command" beginning with '#' followed by whitespace and ending at the next newline is treated as  a  comment.   Any
       optional optional_other_flags will be parsed first followed by the later lines within the script itself.

       In shell script mode, -s is always assumed.  In addition, -d and -p are automatically set if -i is not given.

       NOTE: The use of -f does NOT imply -q and thus one would need to use

            calc [optional_other_flags ...] -q -f filename

       to disable the use of calc startup files as well.

       For example, if the file /tmp/mersenne:

            #!/usr/bin/calc -q -f

            /* setup */
            argc = argv();
            program = argv(0);
            stderr = files(2);

            /* parse args */
            if (argc != 2) {
                fprintf(stderr, "usage: %s exp0, program);
                abort "must give one exponent arg";
            }
            exp = eval(argv(1));
            if (!isint(exp) || exp < 0) {
                fprintf(stderr, "%s: exp must be non-negative integer0, program);
                abort "must give one exponent arg";
            }

            /* print the mersenne number */
            print "2^": exp : "-1 =", 2^exp-1;

       is made an executable file by:

            chmod +x /tmp/mersenne

       then the command line:

            /tmp/mersenne 127

       will print:

            2^127-1 = 170141183460469231731687303715884105727

       Note  that because -s is required in shell script mode non-dashed args are made available as strings via the argv() builtin func-
       tion.  Therefore:

            2^eval(argv(1))-1

       will print the decimal value of 2^n-1 whereas

            2^argv(1)-1

       will not.

       By default, using calc startup in shell script mode, calc will close standard input (stdin).   Thus  builtin  functions  such  as
       prompt(str)  will  fail  (return a null value).  Calc shell scripts that call the prompt(str) builtin will not work properly (the
       prompt builtin will always fail and return a null value) unless the -p flag is given on the command line.

       The following shell script will always print "got null" because stdin will be closed by calc during startup:

            #!/usr/bin/calc -q -f

            # The prompt will ALWAYS FAIL and return a null value
            n = prompt("Test> ");
            if (isnull(n)) {
              print("got null");
            } else {
              print("got " + n);
            }

       However the following shell script (note the -p before the -f in the 1st line) will be interactive,  prompt  with  "Test>  "  and
       print the "got" result as expected:

            #!/usr/bin/calc -q -p -f

            n = prompt("Test> ");
            if (isnull(n)) {
              print("got null");
            } else {
              print("got " + n);
            }

       Note in the example above, the -p flag must be given before the final -f command line flag.

DATA TYPES
       Fundamental builtin data types include integers, real numbers, rational numbers, complex numbers and strings.

       By  use  of  an object, one may define an arbitrarily complex data types.  One may define how such objects behave a wide range of
       operations such as addition, subtraction, multiplication, division, negation, squaring, modulus, rounding, exponentiation, equal-
       ity, comparison, printing and so on.

       For more information use the following calc commands:

          help types
          help obj
          show objfuncs

VARIABLES
       Variables in calc are typeless.  In other words, the fundamental type of a variable is determined by its content.  Before a vari-
       able is assigned a value it has the value of zero.

       The scope of a variable may be global, local to a file, or local to a procedure.  Values may be grouped together in a matrix,  or
       into a list that permits stack and queue style operations.

       For more information use the following calc commands:

          help variable
          help mat
          help list
          show globals

INPUT/OUTPUT
       A leading ``0x'' implies a hexadecimal value, a leading ``0b'' implies a binary value, and a ``0'' followed by a digit implies an
       octal  value.   Complex numbers are indicated by a trailing ``i'' such as in ``3+4i''.  Strings may be delimited by either a pair
       of single or double quotes.  By default, calc prints values as if they were floating point numbers.  One may change  the  default
       to print values in a number of modes including fractions, integers and exponentials.

       A number of stdio-like file I/O operations are provided.  One may open, read, write, seek and close files.  Filenames are subject
       to `` '' expansion to home directories in a way similar to that of the Korn or C-Shell.

       For example:

          ~/.calcrc
          ~chongo/lib/fft_multiply.cal

       For more information use the following calc command:

          help file

CALC LANGUAGE
       The  calc  language  is a C-like language.  The language includes commands such as variable declarations, expressions, tests, la-
       bels, loops, file operations, function calls.  These commands are very similar to their counterparts in C.

       The language also include a number of commands particular to calc itself.  These include commands such  as  function  definition,
       help, reading in resource files, dump files to a file, error notification, configuration control and status.

       For more information use the following calc command:

          help command
          help statement
          help expression
          help operator
          help config

FILES
       /usr/bin/calc
            calc binary

       /usr/bin/cscript/*
            calc shell scripts

       /usr/lib/*.cal
            calc standard resource files

       /usr/lib/help/*
            help files

       /usr/lib/bindings
            non-GNU-readline command line editor bindings

       /usr/include/calc/*.h
            include files for C interface use

       /usr/lib/libcalc.a
            calc binary link library

       /usr/lib/libcustcalc.a
            custom binary link library

       /usr/share/calc/custom/*.cal
            custom resource files

       /usr/share/calc/custhelp/*
            custom help files

ENVIRONMENT
       CALCPATH
            A :-separated list of directories used to search for calc resource filenames that do not begin with /, ./ or ~.

            Default value: .:./cal:~/.cal:/usr/share/calc:/usr/share/calc/custom

       CALCRC
            On startup (unless -h or -q was given on the command line), calc searches for files along this :-separated environment vari-
            able.

            Default value: ./.calcinit:~/.calcrc:/usr/share/calc/startup

       CALCBINDINGS
            On  startup (unless -h or -q was given on the command line, or -m disallows opening files for reading), calc reads key bind-
            ings from the filename specified by this environment variable.  The key binding file is searched  for  along  the  $CALCPATH
            list of directories.

            Default value: binding

            This  variable  is  not used if calc was compiled with GNU-readline support.  In that case, the standard readline mechanisms
            (see readline(3)) are used.

       CALCHISTFILE
            Location of the calc history file.

            Default value: ~/.calc_history

            This variable is not used if calc was compiled with GNU-readline support.

       CALCHELP
            Location of the calc help directory.

            Default value: /usr/share/calc/help

       CALCCUSTOMHELP
            Location of the calc custom help directory.

            Default value: /usr/share/calc/custhelp

       In versions prior to v3, you may adhere to the XDG Base Directory specification by setting up your environment variables as such:

            export CALCRC="${XDG_CONFIG_HOME:-$HOME/.config}/calc/calcrc"
            export CALCPATH=".:${XDG_DATA_HOME:-$HOME/.local/share}/calc:${XDG_CONFIG_HOME:-$HOME/.config}/calc:/usr/share/calc:/usr/share/calc/custom"
            export CALCHISTFILE="${XDG_STATE_HOME:-$HOME/.local/state}/calc/history"

       Note that calc won't create the directory tree to $CALCHISTFILE, you'll need to run:

            mkdir -p $(dirname $CALCHISTFILE)

       in order to have the history mechanism if you choose a path to a file that doesn't exist.

CREDIT
       The main chunk of calc was written by David I. Bell.

       The calc primary mirror, and calc bug report processing is performed by Landon Curt Noll.

       Landon Curt Noll maintains the master reference source, performs release control functions as  well  as  other  calc  maintenance
       functions.

       Thanks for suggestions and encouragement from Peter Miller, Neil Justusson, and Landon Noll.

       Thanks to Stephen Rothwell for writing the original version of hist.c which is used to do the command line editing.

       Thanks  to  Ernest  W. Bowen for supplying many improvements in accuracy and generality for some numeric functions.  Much of this
       was in terms of actual code which I gratefully accepted.  Ernest also supplied the original text for many of the help files.

       Portions of this program are derived from an earlier set of public domain arbitrarily precision routines which was posted to  the
       net around 1984.  By now, there is almost no recognizable code left from that original source.

COPYING / CALC GNU LESSER GENERAL PUBLIC LICENSE
       Calc  is  open software, and is covered under version 2.1 of the GNU Lesser General Public License.  You are welcome to change it
       and/or distribute copies of it under certain conditions.  The calc commands:

            help copyright
            help copying
            help copying-lgpl
            help credit

       should display the contents of the COPYING and COPYING-LGPL files.  Those files contain information about the calc's  GNU  Lesser
       General Public License, and in particular the conditions under which you are allowed to change it and/or distribute copies of it.

       You  should  have  received  a copy of the version 2.1 of the GNU Lesser General Public License.  If you do not have these files,
       write to:

            Free Software Foundation, Inc.
            51 Franklin Street
            Fifth Floor
            Boston, MA  02110-1301
            USA

       Calc is copyrighted in several different ways.  These ways include:

            Copyright (C) year  David I. Bell
            Copyright (C) year  David I. Bell and Landon Curt Noll
            Copyright (C) year  David I. Bell and Ernest Bowen
            Copyright (C) year  David I. Bell, Landon Curt Noll and Ernest Bowen
            Copyright (C) year  Landon Curt Noll
            Copyright (C) year  Ernest Bowen and Landon Curt Noll
            Copyright (C) year  Ernest Bowen
            Copyright (C) year  Petteri Kettunen and Landon Curt Noll
            Copyright (C) year  Christoph Zurnieden
            Copyright (C) year  Landon Curt Noll and Thomas Jones-Low
            Copyright (C) year  Klaus Alexander Seistrup and Landon Curt Noll

       This man page is:

            Copyright (C) 1999-2023  Landon Curt Noll

       and is covered under version 2.1 GNU Lesser General Public License.

       A few files in calc are covered under "The Unlicense".  For more information on this license, see:

            https://unlicense.org

CALC QUESTIONS
       To ask the calc maintainers a general question about calc, see the output of the following calc command:

            ; help question

       or read the source file:

            QUESTIONS

       or visit the following URL:

            https://github.com/lcn2/calc/blob/master/QUESTIONS

BUG REPORTS / BUG FIXES
       To inform the calc maintainers about a bug, or to submit a bug fix, see the output of the following calc command:

            ; help bugs

       or read the source file:

            BUGS

       or visit the following URL:

            https://github.com/lcn2/calc/blob/master/BUGS

CONTRIBUTING CODE TO CALC
       Calc is open source.  You are welcome to contribute code to calc, or submit bug fixes to to calc.

       To contribute code to calc, please see see the output of the following calc command:

            ; help contrib

       or read the source file:

            CONTRIB-CODE

       or visit the following URL:

            https://github.com/lcn2/calc/blob/master/CONTRIB-CODE

CALC WEB SITE
       Landon Noll maintains the calc web site is located at:

            www.isthe.com/chongo/tech/comp/calc/

CALC SOURCE CODE
       The latest version of calc source code may be obtained at the following GitHub repo:

            https://github.com/lcn2/calc

       The very latest calc source is found at the top master branch.

       You may download the calc releases from:

            https://github.com/lcn2/calc/releases

       The releases marked ((Pre-release)) are beta releases.

       The most recent release that is NOT  marked ((Pre-release)) is the recommended stable release.

Share and enjoy!  :-)                                             ^..^                                                           calc(1)
